Kyocera TASKALFA FS-1100 Command Reference

PRESCRIBE Command Reference
104
FLAT — set FLATness
Format
FLAT flatness;
Parameters
flatness:
number from 1 to 100
Function
The FLAT command determines how smoothly curves in paths are to be drawn when a
STRK or FILL command is used. Higher number values produce rougher curves and
lower number values create smoother curves which require greater computation. The
number actually specifies the maximum error tolerance of a straight line segment
approximation of any portion of the curve.
The printing system resets the flatness to 1 when it receives the RES command.
File
!R! RES; FRPO N8,0; CMNT 300 dpi;
UNIT C; SPD 0.02;
NEWP; CMNT 1st circle (FLAT 1);
PMRA 7, 16.5, 2, 0;
PARC 7, 16.5, 2, 0, 360;
STRK;
NEWP; CMNT 2nd circle (FLAT 50);
FLAT 50;
PMRA 12, 16.5, 2, 0;
PARC 12, 16.5, 2, 0, 360;
STRK;
PAGE; EXIT;
Printout

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows