Kyocera TASKALFA FS-1100 Command Reference

PRESCRIBE Command Reference
252
RWRF D — [Read/Write Resource File] Delete
data on external device
Format
RWRF D, medium, data-type, "file-name";
Parameters
medium:
0 = hard disk
A = memory card
data-type:
"API" API program
"FNT" Font data
"MCR" Macro data
"PRN" Printable data
file-name:
ASCII text string up to 15 bytes
Function
The RWRF D command deletes data that is written to an external device such as the hard
disk.
This command has no effect if the media has been write protected using KPDL or PJL.
This command causes a page break.
Any write information page is not printed when the file is deleted.
Example:
Delete macro file "TEST", which is registered in the hard disk.
!R! RWRF D,0, "MCR" , "TEST"; EXIT;

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows