Kyocera TASKALFA FS-1100 Command Reference

SCS
281
SCS — Set Character Spacing
Format
SCS distance;
Parameter
distance:
character-to-character spacing, or 0
Function
The SCS command sets the distance from the beginning of one character to the
beginning of the next character.
When a proportionally-spaced font is used and the font mode (FTMD) is 0 to 3 or 8 to
11, SCS 0 (zero) must be specified to obtain the innate spacing of each character. A non-
zero specification results in unnatural spacing of proportional fonts.
SCS 0 does not change the width of the space character.
The character spacing can be set using either the SCS or the SCPI command.
File
!R! RES; SLM 1; STM 2; EXIT;
This line has the default spacing.
!R! UNIT C; SCS .3; EXIT;
This line has a slightly wider spacing.
!R! SFNT ’TimesNewRoman’, 10; SCS .2; EXIT;
This is a proportional font printed with fixed spacing.
!R! SCS 0; EXIT;
This is correct proportional spacing.
!R! PAGE; EXIT;
Printout

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows