Kyocera TASKALFA FS-1100 Command Reference

STR
343
STR — SeT dot Resolution
Format
STR dot-resolution;
Parameter
dot-resolution:
75, 100, 150, 200, 300, 600, or 1200
Function
The STR command sets the dot resolution for raster graphics to 75, 100, 150, 200, 300,
600, or 1200 dots per inch. The 200, 600, and 1200 dpi resolutions are available only for
the printing system models that support the 600 or 1200 dpi printing resolution. The
default value is 75 dots per inch.
The STR command affects only PRESCRIBE raster graphics. It does not change the
resolution of vector graphics commands or HP LaserJet raster graphics.
The following diagrams show examples of printing a raster graphics data using different
dot resolution.
75 dpi resolution
(Default)
100 dpi resolution
150 dpi resolution
200 dpi resolution
300 dpi resolution
600 dpi resolution
1200 dpi resolution

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows