Kyocera TASKALFA FS-1100 Command Reference

PRESCRIBE Command Reference
266
SCAP — Set line CAP
Format
SCAP mode;
Parameter
mode:
line cap mode:
1 = square caps
2 = butt caps
3 = round caps
Function
The SCAP command determines the shape of line ends (or a line cap) in a path where
they are finally stroked. The default caps is butt caps (2).
Square caps have square ends which extend one-half of a line width beyond the
endpoints of the line. Butt caps are similar to square caps but the caps are flash with the
endpoints and do not extend beyond them. Round caps end the lines with semicircular
caps with diameters identical to the line width.
File
!R! UNIT C; SPD .5;
NEWP; CMNT Round-capped on every end;
SCAP 3;
PMZP 6, 6;
SCP; SCP;
PDRP 1, -1; RPP;
PDRP 1, 1; RPP;
PDRP 5, 0;
STRK;
PAGE; EXIT;
Square caps (default)
Butt caps
Round caps

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows