Kyocera TASKALFA FS-1100 Command Reference

DAP
73
DAP — Draw to Absolute Position
Format
DAP x-coordinate, y-coordinate;
Parameters
x-coordinate:
distance from the left margin
y-coordinate:
distance from the top margin
Function
The DAP command draws a line from the current cursor position to a position specified
relative to the top and left margins. The thickness of the line is designated by the SPD
(set pen diameter) command. The coordinates and line thickness are measured in the
units designated by the UNIT command.
The coordinates may be positive or negative. Negative coordinates cause the line to
extend outside the margin.
The DAP command is ignored in the path mode graphics.
File
!R! RES;
UNIT C;
CMNT Tree Diagram;
STM 8; SLM 8;
MAP 0, 0; DAP 2, 0.5;
MAP 0, 1; DAP 2, 0.5;
MAP 0, 1; DAP 2, 1.5;
MAP 0, 2; DAP 2, 1.5;
MAP 0, 2; DAP 2, 2.5;
MAP 0, 3; DAP 2, 2.5;
MAP 2, 0.5; DAP 4, 1;
MAP 2, 1.5; DAP 4, 1;
MAP 2, 1.5; DAP 4, 2;
MAP 2, 2.5; DAP 4, 2;
MAP 4, 1; DAP 6, 1.5;
MAP 4, 2; DAP 6, 1.5;
PAGE; EXIT;

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows