Kyocera TASKALFA FS-1100 Command Reference

COPY
61
COPY — set number of COPIES
Format
COPY number;
Parameter
number:
number of copies
Function
The COPY command designates the number of copies for each page in a print job. This
copy count value can be changed by sending the printing system another COPY
command or by issuing a reset command. For best results, place the copy command near
the start of a job or at the top of a page. If two or more copy commands are placed on the
same page, the last one will be recognized.
File
!R! RES;
SLM 0.5;
UNIT P;
SFNT ’Helvetica-Bd’, 14.4;
SLS 17;
COPY 3;
EXIT;
Announcement
Party Tonight at 6:00
!R! PAGE; EXIT;

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows