Kyocera TASKALFA FS-1100 Command Reference

ASFN
31
ASFN — ASsign external characters for FoNt
Format
ASFN mode, font-number;
Parameters
mode:
A = assign external characters
R = release external characters
font-number:
number identifying the external character font: 1000 to 65535
Function
The ASFN command assigns external characters which are defined by the user to the
current resident font. The external characters should be generated and downloaded in the
printing system as an external font by using the LDFC or LDFN command.
For the print systems supporting 2-byte font system, if the user-defined font is a 1-byte
code font, it is assigned to the current resident roman (ANK) font. If it is a 2-byte code
font, it is assigned to the current 2-byte font.
This command has no effect if the resident font is a bitmap font and the font to be
assigned is an outline font, or vice versa.
mode = R is used to release the current resident font from the external characters. Note
that it is necessary to release the external font assignment if you want to delete the
external font.

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows