PSRC
213
PSRC — select Paper SouRCe
Format
PSRC mode;
Parameter
mode:
0 = multi-purpose tray
1 = Cassette 1
2 = Cassette 2
3 = Cassette 3
4 = Cassette 4
5 = Cassette 5
6 = Cassette 6
99 = envelope feeder
100 = automatic
Function
The PSRC command selects whether to feed paper from the cassette, multi-purpose tray,
cassettes of the paper feeders, or the envelope feeder. Each cassette of the paper feeder is
assigned a cassette number in the order from the top as 1 through 6.
Mode 100 of PSRC enables the automatic cassette switching depending on media type
and size. The printing system automatically selects the paper cassette having the paper
that matches the type and size defined by MTYP and SPSZ respectively.
The PSRC command causes a page break, so it should be placed at the beginning of a file
or program, or at the top of a new page. The current paper source will remain selected if
the specified cassette is not installed.
File
!R! RES; UNIT C;
SFNT "Helvetica-Nr", 24;
PSRC 1;
TEXT "This page is fed from the default cassette.";
PAGE;
PSRC 0;
TEXT "This page is fed from the multi-purpose tray."
PSRC 100; SPSZ 10;
TEXT "This page is printed on a A3 sheet that the print
system looks for automatically.";
PAGE;
EXIT;
To Next Page
Loading...
Need help?
General
