Kyocera TASKALFA FS-1100 Command Reference

PRESCRIBE Command Reference
82
DRPA — Draw to Relative Position specified by
Angle
Format
DRPA length, angle;
Parameters
length:
length of the line
angle:
angle in degrees, measured clockwise from the vertical
Function
The DRPA command draws a line of a specified length at a specified angle, starting from
the current cursor position, with the thickness designated by the SPD command.
This command is ignored if placed within a path.
File
!R! RES; UNIT C;
MAP 2, 11;
DRPA 2, 72;
DRPA 2, 0;
DRPA 2, 144;
DRPA 2, 72;
DRPA 2, 216;
DRPA 2, 144;
DRPA 2, 288;
DRPA 2, 216;
DRPA 2, 0;
DRPA 2, 288;
PAGE;
EXIT;

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows