Kyocera TASKALFA FS-1100 Command Reference

ALTF
23
ALTF — change to ALTernate Font
Format
ALTF alternate-number;
Parameter
alternate-number: a number from 0 to 47
Function
The ALTF command changes the current font to a font designated by an alternate
number. The actual font assigned to this alternate number is set by a previous SETF
command.
The alternate number can be a bitmap font number or a number specifically assigned to
the scalable font using the SFNT command (See File on the next page).
If no font has been assigned to the specified alternate number, the ALTF command has
no effect: the font does not change.
The ALTF command enables you to prepare a document using several fonts, without
deciding in advance which specific fonts to use. For example, you could use ALTF 1 to
designate plain text and ALTF 2 to designate italics, and allow the specific size and style
of type to be determined by SETF commands at a later time.

Kyocera TASKALFA FS-1100 Specifications

General

Technology	Laser
Maximum resolution	1200 x 1200 DPI
Standard output capacity	250 sheets
Duplex Printing	Yes
Paper size (tray 1)	A4
Print media types	Plain paper, Recycled paper
Standard interfaces	USB 2.0
Product colour	White
Functions	Print
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows