EasyManuals Logo

Kyocera TASKALFA FS-1100 Command Reference

Kyocera TASKALFA FS-1100
410 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
PRESCRIBE Command Reference
42
BOX — draw BOX
Format
BOX width, depth[, option];
Parameters
width:
width of the box
depth:
depth of the box
option:
B = Leave the cursor unmoved (Default)
H = Move the cursor to the horizontally adjacent corner
V = Move the cursor to the vertically adjacent corner
E = Move the cursor to the diagonally oppos
i
te corner
L = Move the cursor one line down
N = Move the cursor to the beginning of the next line
Function
The BOX command draws a box of a specified size with one corner at the current cursor
position. The line thickness is designated by the SPD (set pen diameter) command. The
size and thickness is measured on the basis of value established in the UNIT command.
The cursor is moved as specified by the option. If the option is omitted, the cursor is not
moved (same as option B).
The BOX command draws only the outline of the box. To fill in the box, use the BLK
command.
The width and depth may use either a positive or negative value.
File
!R! RES; UNIT C; SPD .1;
SLM 2;
N-option
B-option (No motion)
H-option
E-option
V-option
L-option
Left margin

Table of Contents

Other manuals for Kyocera TASKALFA FS-1100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera TASKALFA FS-1100 and is the answer not in the manual?

Kyocera TASKALFA FS-1100 Specifications

General IconGeneral
TechnologyLaser
Maximum resolution1200 x 1200 DPI
Standard output capacity250 sheets
Duplex PrintingYes
Paper size (tray 1)A4
Print media typesPlain paper, Recycled paper
Standard interfacesUSB 2.0
Product colourWhite
FunctionsPrint
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Operating System CompatibilityWindows

Related product manuals