6-22
Sending Faxes from PC > Basic Transmission
4
Add the destination to the destination list.
1 Add this information to the [Destination List] by clicking on the [Add to Destination List]
button.
2 To change the recipient information of a destination that has been added to the
[Destination List], select the destination to be changed and click on the [Edit] button.
Change the recipient information and click on the [OK] button.
3 When the sender information is not set in the [Default Settings] dialog box, click on the
[Sender Information] tab and set the sender information.
.
Item Description
FAX Number The fax number cannot be changed.
Company A maximum of 32 characters can be entered.
Department A maximum of 32 characters can be entered.
Recipient A maximum of 32 characters can be entered.
(4) Sender Information Tab (page 6-14)
Item Description
Company A maximum of 64 characters can be entered.
Department A maximum of 64 characters can be entered.
Name A maximum of 32 characters can be entered.
Telephone Number A maximum of 20 characters can be entered. (Entry is allowed for the
characters 0 to 9, #, *, -, +, and spaces.)
FAX Number A maximum of 20 characters can be entered. (Entry is allowed for the
characters 0 to 9, #, *, -, +, and spaces.)
E-mail Address A maximum of 128 characters can be entered.
Available characters:
Symbols ( !, #, $, %, &, ’, *, +, -, ., /, =, @, [, ], ^, _, `, { and })
Alphanumerics (0 – 9, A – Z and a – z)
To Next Page
Loading...
