L-Acoustics A10 - Page 73

Rigging procedures
KS21 array
Procedure
1. Prepare a stack of KS21.
Connect each enclosure on both sides before adding the new one.
SHLAK!
2. Secure A15-BUMP or A15-RIGBAR on top of the array.
A15-BUMP A15-RIGBAR
Connect A15-BUMP to the top KS21 on both sides. Connect A15-RIGBAR to the top KS21 on both sides.
CLICK!
CLICK!
A10 owner's manual (EN) version 1.1 73