L-Acoustics KARA MODULAR WST SYSTEM User Manual

KARA
KARAKARA
KARA
®
®®
®
M
MM
MO
OO
ODULAR
DULARDULAR
DULAR WST
WST WST
WST
®
®®
®
SYSTEM
SYSTEM SYSTEM
SYSTEM
rigging procedures using
rigging procedures using rigging procedures using
rigging procedures using kara
karakara
kara-
--
-minibu
minibuminibu
minibu
VERSION 1.0
KARA_SRM_EN_1-0
w w w . l - a c o u s t i c s . c o m
6
66
6
4
44
4 KARA
KARAKARA
KARA
®
®®
®
S
SS
SYSTEM
YSTEMYSTEM
YSTEM
The L-ACOUSTICS
®
KARA-MINIBU, KARA-MINIBUEX, KARA-ANGARMEX, and KARA-PULLBACK
elements have been designed to assemble the KARA
®
Modular WST
®
Line Source System as a flown or stacked
vertical array.
The system approach developed by L-ACOUSTICS
®
for KARA consists of the elements needed to fully take advantage
of the possible configurations and optimize the system. The main components of the system are (see also Figure 1 and
Figure 2):
KARA
®
 Full range active 2-way modular WST
®
enclosure
KARA-MINIBU  Structure for flying or stacking a small format KARA and/or SB18 array
KARA-MINIBUEX  KARA-MINIBU extension accessories for SB18 rigging
KARA-ANGARMEX  Angle arm extensions (x2) for stacked KARA arrays
KARA-PULLBACK  Rigging accessory for KARA array pullback configuration
SB18  Compact high power subwoofer
SB28  High power subwoofer
LA8  Amplified controller
LA NETWORK MANAGER  Remote control software for amplified controllers
SOUNDVISION  Acoustical and mechanical modeling software
Each loudspeaker assembly configuration should first be modeled using L-ACOUSTICS
®
SOUNDVISION Software
[3.4] to verify its mechanical conformity. Please refer to the SOUNDVISION Help menu to obtain a detailed
description on software use.
Figure 1: KARA system components (part 1)
LA8
LA NETWORK MANAGER
SOUNDVISION

L-Acoustics KARA MODULAR WST SYSTEM Specifications

General

Brand	L-Acoustics
Model	KARA MODULAR WST SYSTEM
Category	Enclosure
Language	English