L-Acoustics KARA MODULAR WST SYSTEM User Manual

KARA
KARAKARA
KARA
®
®®
®
M
MM
MO
OO
ODULAR
DULARDULAR
DULAR WST
WST WST
WST
®
®®
®
SYSTEM
SYSTEM SYSTEM
SYSTEM
rigging procedures using
rigging procedures using rigging procedures using
rigging procedures using kara
karakara
kara-
--
-minibu
minibuminibu
minibu
VERSION 1.0
KARA_SRM_EN_1-0
w w w . l - a c o u s t i c s . c o m
52
5252
52
6.4.3 Array disassembling procedure
All along the procedure:
STRICTLY follow the sequence of the successive steps.
SYSTEMATICALLY verify that each BLP is fully inserted.
For clarity purposes the loudspeaker cables removal procedure will not be described.
The loudspeaker cables will not be represented in the figures.
1. Detach the ratchet strap or other equivalent material from the stacked array.
2. Bring an empty KARA flight-case to the rigging location and remove the lid.
3. Separate the top KARA (KARA#3 for example) from the array by removing the four KARA#2 top R-BLP from
their link holes and re-inserting them into their storage holes.
Figure 57: Separating KARA#3 from KARA#2
KARA#3
KARA#1
KARA#2
SB18#2
SB18#1
CAUTION
WARNING

L-Acoustics KARA MODULAR WST SYSTEM Specifications

General

Brand	L-Acoustics
Model	KARA MODULAR WST SYSTEM
Category	Enclosure
Language	English