Electro-acoustical description
Adjustable fins
Horizontal directivity can be set independently on the four Panflex modules of L2 and the top two Panflex modules
of L2D using the push-push mechanism of the fins in combination with the specific electronic presets. There are four
possible settings: 70° / 110° symmetric or 90° asymmetric (35°/55° or 55°/35°).
The bottom two Panflex modules of L2D have a fixed progressive directivity pattern from 110° to 140°.
The Panflex modules are equipped with a push-push mechanism: push on the retracted fin to deploy it, push on the
deployed fin to retract it.
Risk of breaking the fin hooks
Do not use excessive force when deploying the fins.
Apply pressure on the external side of the fin on both the upper and lower areas at the same time.
Within a line source, combine L2 and L2D with custom directivity settings to improve the coverage of the audience
geometry.
16 L2 owner's manual (EN) version 5.0
To Next Page
Loading...
