Inspection and preventive maintenance
Mechanical system overview
Critical parts of the lifting chains are highlighted.
The indicates a visual inspection. The indicates a functional check.
Perform the Rigging part inspection (p.56) on critical parts.
For each part, refer to the Inspection references (p.65).
Replacing screws
If a screw is loose, remove and replace it.
Always use the new screws provided in the repair kit.
If no new screw is available, add blue threadlocker before reusing the screw.
Do not apply more than the indicated torque.
L2 owner's manual (EN) version 5.0 57
To Next Page
Loading...
