Rigging procedures
Rigging procedures
Securing L2/L2D on L2-CHARIOT/L2D-CHARIOT
Type of deployment stacking
Rigging accessories L2-CHARIOT/L2D-CHARIOT
L2-RIGBAR
BPCHAIN 1.5T
L2-ROLL
Tools screwdriver
8 mm hex bit
Min number of operators 2
Do not use L2-ROLL for rigging.
L2-ROLL is a temporary handling tool, not a long-term rigging accessory.
Never position L2D on its narrow edge, even temporarily.
To reverse L2/L2D for maintenance operations, refer to Preparing enclosures for maintenance (p.143).
Prerequisite
The top lid and main body of the delivery packaging are removed.
Inspect L2-ROLL before use.
Do not use if any safety issue is detected during inspection (fraying, deformation, etc.).
86 L2 owner's manual (EN) version 5.0
To Next Page
Loading...
