3. Collect the microplates that will serve as destination plates to receive the reagent. A destination microplate definition must
exist or be created. For example, knowing the plate height of the destination microplate allows the Echo Liquid Handler to
lower the destination microplate into very close proximity to the source microplate, improving droplet ejection accuracy
and reliability.
Run a Liquid Transfer Protocol
Before running the liquid transfer protocol, you will need to prepare the reagent to be transferred and set up the microplates. For
information on how to set up microplates, see Prepare the Microplates.
To run a liquid transfer protocol:
1. From the Protocols window, select the protocol to be run and click the Run button. The first of a series of screens is
displayed to provide instructions to run the selected protocol.
105 PN | 001-11665
USER GUIDE | Echo® 525 Liquid Handler User Guide Echo Liquid Handler Software
To Next Page
Loading...
