Lagler Flip - Page 15

FLIP
®
01.01.2019
English / Englisch
Protection class IP 22
Protection system 2
Safety devices
no-voltage release,
temperature switch as
overload protection in
the motor
Diameter of sanding disc
- short and long attachment
- corner attachment
150 mm (~ 5.9”)
61 mm (~ 2.4”)
Speed of sanding disc under load
- short and long attachment
- corner attachment
approx. 3100 1/min (rpm)
approx. 7750 1/min (rpm)
Length
- short attachment
- long attachment
- corner attachment
155 mm (~ 6.1”)
315 mm (~ 12.4”)
225 mm (~ 8.9”)
Height
- short and long attachment
without wall-protecting roller
- short and long attachment
with wall-protecting roller
- corner attachment
44 mm (~ 1.7“)
58 mm (~ 2.3“)
51.5 mm (~ 2“)
Overall length of machine without
dust bag
- with short attachment
- with long attachment
- with corner attachment
460 mm (~ 18.1”)
620 mm (~ 24.4”)
530 mm (~ 20.9”)
Overall height of machine without
dust bag
460 mm (~ 18.1”)
Overall width of machine 260 mm (~ 10.2”)
Overall weight of machine 9,8 kg (21.6 lbs)
Dust emissions at workplace
(measured as per the testing
requirements GS-HO-15 of German
statutory accident insurance
DGUV)
< 0,2 mg/m³
(0.0024 gr./cu.yd.)
Workplace-related noise emission
values
84 dB(A)
Sound power level 95 dB(A)
Measurement uncertainty
constant of the noise emission
values
4 dB(A)
Vibration total value a
hv
(measured at the handle)
< 2.5 m/s²
TECHNICAL DATA
3
NOTE on noise emission:
The values indicated are emission values
and must not represent safe workplace
values as well.
Although a correlation exists between
emission levels and immission levels, it is
not always possible to determine whether
additional precautionary measures are
required.
Factors that can have an effect on the
immission level existing at the workplace
include the duration of the effects, the
characteristics of the work area and
other sources of noise, e.g. the number of
machines and processing operations in the
vicinity. The permissible workplace values
may also vary from country to country.
This information, however, is intended
to enable the user to better estimate the
dangers and risks.
15