FLIP
®
01.01.2019
English / Englisch
• Prevent sanding marks made by previously used grit grade by
adhering to the order of the sandpaper grit grade and never
skip more than one grit grade.
• After replacing the sanding disc, start working in poorly lit
areas of the room in order to remove the initial aggressiveness
of the sanding medium.
• Vacuum the floor thoroughly always directly before each
workstep (every sanding step, gap filling or surface
treatment).
• Clean the wheels of the machine regularly.
WORKING WITH THE FLIP
®
5
Fig. 13 FLIP
®
with corner attachment:
Direction of movements is counterclockwise!
21
To Next Page
Loading...
