Lagler Flip - Page 3

FLIP
®
01.01.2019
English / Englisch
CONTENTS
8 Regular inspection and maintenance work in accordance with accident prevention regulations .................44
9 Causes of faults ............................................................................................................................................................46
9.1 The machine does not run or has switched off automatically.................................................................................46
9.2 The machine attempts to start up but is not able to do so .......................................................................................47
9.3 The machine runs but has no or very little sanding power capacity ......................................................................47
9.4 The machine vibrates intensely and runs noisily ......................................................................................................48
9.5 The machine runs but creates a great deal of dust ..................................................................................................48
9.6 Sanding problems (waves, strips, grooves) ...............................................................................................................49
10 Circuit diagram .............................................................................................................................................................51
11 Spare parts FLIP
®
........................................................................................................................................................52
12 Service passport ..........................................................................................................................................................63
13 EC Declaration of conformity for machines (EC Directive 2006/42/EC) .................................................................64
WARNING!
Death, severe physical injury or significant property damage can occur if the
corresponding cautionary measures are not taken!
CAUTION!
Moderate to light physical injury or property damage can occur if the corresponding
cautionary measures are not taken!
ATTENTION! An undesired event can occur if the corresponding instructions are not followed!
Safety notes used in this operating instructions and their meaning:
3