Lagler Flip - Page 35

FLIP
®
01.01.2019
English / Englisch
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
9 Tighten the motor pulley using the spanner and pliers.
10 Install the handle on the motor housing.
WARNING!
RISK OF DEATH from electrical shock:
Do not pinch any cables while installing the handle!
11 Install the attachment on the machine ( Section 7.3.2,
Installing the V-belt) and tighten the V-belt ( Section 7.2,
Tightening the V-belt).
7
35