A: Configuration Using Telnet or Serial Port
EDS4100 4 Port Device Server User Guide 136
Configure Menu
Command
Description
clear tcp counters
Set the TCP counters to zero.
clear telnet
Ends an active Telnet session on the EDS4100.
clear tftp counters
Sets the TFTP counters to zero.
clear udp counters
Set the UDP counters to zero.
clrscrn
Clears the screen.
enable password
Sets the password for the Enable-level menu.
exit
Exit the Configure menu and returns to the Enable menu.
hostname <string>
Sets the system hostname.
<string> = hostname to be assigned to the system.
if 1
Display the Interface 1 menu.
ip domain name <string>
Sets the default domain name on the EDS4100.
<string> = default domain name.
ip ftp enable
Enables the FTP server.
ip ftp password
<string>
Sets the administrative password for the FTP server.
<string> = administrative password.
ip ftp username
<string>
Set the administrative username for the FTP server.
<string> = administrative username.
ip http auth <uri>
<realm>
Creates a new HTTP server authentication directive.
<uri> = URI of the server.
<realm> = domain of the server.
ip http auth type <uri>
basic
Sets an HTTP server authentication directive to the Basic
Access Authentication scheme.
<uri> = URI of the server.
ip http auth type <uri>
digest
Sets an HTTP server authentication directive to the
Digest Access Authentication scheme.
<uri> = URI of the server.
ip http auth type <uri>
none
Sets the authentication type for an HTTP server
authentication directive to none.
<uri> = URI of the server.
ip http auth type <uri>
ssl
Sets the authentication type for an HTTP server
authentication directive to SSL.
<uri> = URI of the server.
ip http auth type <uri>
ssl-basic
Sets the authentication type for an HTTP server
authentication directive to SSL-Basic.
<uri> = URI of the server.
ip http auth type <uri>
ssl-digest
Sets the authentication type for an HTTP server
authentication directive to SSL-Digest.
<uri> = URI of the server.
To Next Page
Loading...
Need help?
General