A: Configuration Using Telnet or Serial Port
EDS4100 4 Port Device Server User Guide 137
Configure Menu
Command
Description
ip http auth user <uri>
<user> <password>
Creates or modifies a user for an HTTP server
authentication directive.
<uri> = URI of the server.
<user> = username.
<password> = password associated with the username.
ip http log
Enables HTTP server logging.
ip http log entries
<number>
Sets the maximum number of HTTP server log entries.
<number> = maximum number of HTTP server log
entries.
ip http log format
<string>
Sets the log format for the HTTP server.
<string> = log format.
ip http max bytes
<bytes>
Sets the maximum number of bytes the HTTP server
accepts when receiving a request.
<bytes> = maximum number of bytes.
ip http max timeout
<seconds>
Sets the maximum timeout the HTTP server waits when
receiving a request.
<seconds> = maximum timeout value.
ip http port <number>
Sets the port number.
<number> = port number.
ip http server
Enables the HTTP server.
ip http ssl port
<number>
Sets the SSL port number for use with the HTTP server.
<number> = SSL port number.
ip icmp enable
Allows the transmission and retrieval of Internet Control
Message Protocol (ICMP) packets.
ip name-server <ip
address>
Sets the primary DNS server.
<ip address> = IP address of the primary server.
ip name-server <ip
address1> <ip address2>
Sets the primary and secondary DNS servers.
<ip address1> = IP address of the primary server.
<ip address2> = IP address of the secondary server.
ip ssh enable
Enable the SSH server.
ip ssh port <number>
Sets the local port for SSH that the server uses.
<number> = local port number.
ip tcp resets enable
Sends TCP RSTs upon connection to unused ports.
ip telnet enable
Enables and starts the Telnet server.
ip telnet port <number>
Sets the Telnet port that the server uses.
<number> = Telnet port number.
ip tftp allow file
creation
Enables the automatic creation of files by the TFTP
server.
ip tftp enable
Enables the TFTP server.
To Next Page
Loading...
Need help?
General