Lantronix EDS4100 User Manual

A: Configuration Using Telnet or Serial Port
EDS4100 4 Port Device Server User Guide 139
Configure Menu
Command
Description
no snmp-server
community rw
Removes the SNMP read/write server community string.
no snmp-server contact
Remove the SNMP server contact.
no snmp-server
description
Clears the SNMP server description.
no snmp-server enable
Disables the SNMP server.
no snmp-server enable
traps
Disables SNMP server traps.
no snmp-server host <ip
address>
Deletes the SNMP server host.
<ip address> = IP address of the SNMP server.
no snmp-server host <ip
address1> <ip address2>
Deletes the primary and secondary SNMP server hosts.
<ip address1> = IP address of the primary SNMP server.
<ip address2> = IP address of the secondary SNMP
server.
no snmp-server location
Clears the SNMP server location.
no snmp-server name
Clears the SNMP server name.
password
Sets the new password. Prompts for a password, then
requests password verification.
password <string>
Enter the password on one line.
<string> = password.
query-port enable
Enables the query port.
show ftp
Displays the FTP configuration and statistics.
show history
Displays previously entered commands.
show http
Displays the HTTP server settings.
show http auth
Displays the HTTP server authentication settings.
show http log
Displays the HTTP server log.
show http statistics
Displays the HTTP statistics.
show icmp
Displays ICMP state and statistics.
show ip
Displays the IP statistics.
show rss
Displays the RSS feed settings.
show snmp-server
Displays the SNMP server settings.
show ssh
Displays the IP SSH configuration.
show telnet
Displays the Telnet configuration.
show tftp
Displays the TFTP settings and statistics.
show udp
Display the UDP settings and statistics.

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English