PremierWave® XC HSPA+ Intelligent Gateway User Guide 126
18: Branding the PremierWave XC HSPA+ Device
This chapter describes how to brand your PremierWave XC HSPA+ intelligent gateway by using
Web Manager and Command Line Interface (CLI). It contains the following sections on
customization:
Web Manager Customization
Short and Long Name Customization
Web Manager Customization
Customize the Web Manager's appearance by modifying index.html, style.css, and the product
logo. The style (fonts, colors, and spacing) of the Web Manager is controlled with style.css. The
text and graphics are controlled with index.html. The product logo is the image in top-left corner of
the page and defaults to a product name image.
Note: The recommended dimensions of the new graphic are 300px width and 50px
height.
The Web Manager files are hidden and are incorporated directly into the firmware image but may
be overridden by placing the appropriate file in the appropriate directory on the PremierWave XC
HSPA+ unit file system.
Web Manager files can be retrieved and overridden with the following procedure:
1. FTP to the PremierWave XC HSPA+ device.
2. Make a directory (mkdir) and name it http/config .
3. Change to the directory (cd) that you created in step 2 (http/config).
4. Save the contents of index.html and style.css by using a web browser and navigating to
http://<PremierWave hostname>/config/index.html and http://
<PremierWave hostname>/config/style.css.
5. Modify the file as required or create a new one with the same name.
6. To customize the product logo, save the image of your choice as PremierWave_logo.gif
and PremierWave.png
7. Put the file(s) by using put <filename>.
8. Type quit. The overriding files appear in the file system's http/config directory.
9. Restart any open browser to view the changes.
10. If you wish to go back to the default files in the firmware image, simply delete the overriding
files from the file system.
To Next Page
Loading...
Need help?
General
