PremierWave® XC HSPA+ Intelligent Gateway User Guide 94
13: SMS Settings
SMS settings allows the user to view and configure inbound/outbound SMS to/from the device.
Adding a number to the SMS whitelist allows the SMS from the number to trigger one or more
control functions on the device. The following control functions are available:
Shoulder-Tap function can be used to bring up the cellular connection. Since this function has
only one action ("on"), the message text should be "shoulder-tap".
Relay Control function can be used to turn a relay on or off. To turn a relay on, the text should
be "relay 1 on", or on a device with a single relay, just "relay on". To turn a relay off, the text
should be "relay 1 off", or on a device with a single relay, just "relay off".
Inbound SMS
Table 13-1 Inbound SMS Settings
Table 13-2 Adding a New SMS Settings
Outbound SMS
Table 13-3 Outbound SMS Settings
Inbound SMS Settings Description
Delete Click beside an existing SMS Sender Configuration to delete it.
Number View the sender number of an existing SMS sender.
Shoulder Tap Check to allow incoming SMS with content containing ‘shoulder tap’
from this sender to start the cellular interface.
Relay Control Check to allow incoming SMS with content containing ‘relay N On/Off’
from this sender to open and close the device relays.
Inbound SMS Settings Description
Number Enter the new SMS Sender number to be added.
Whitelists Check to select a specific whitelist to be associated with newly added
SMS sender number:
Shoulder Tap
Relay Control
Add (button) Click the Add button after entering the new SMS sender information.
Outbound SMS Settings Description
Message Center Default Number Displays the Message Center number as configured in the SIM.
Message Center Override Number Enter a number to override the existing Message Center number.
Band Select a band from the drop-down menu:
Circuit Switched only
Packet Domain only
Circuit Switched preferred
Packet Domain preferred
Note: Check with your service provider for supported bands.
To Next Page
Loading...
Need help?
General
