12: Network Services
PremierWave® XC HSPA+ Intelligent Gateway User Guide 90
To Configure RSS Settings
Using Web Manager
To configure RSS and view current RSS statistics, click RSS in the menu.
Using the CLI
To enter the RSS command level: enable -> config -> rss
Using XML
Include in your file: <configgroup name=”rss”>
SNMP Settings
Simple Network Management Protocol (SNMP) settings may be viewed and configured in this
section.
Table 12-7 SNMP Settings
To Configure SNMP Settings
View Click the button to view RSS feeds.
Clear Click the button to clear RSS feed data.
SNMP Settings Description
State Select to enable or disable the SNMP agent state.
Version Select the SNMP version used by the SNMP agent.
Read Community Specify the read community used by the agent (defaults to public community).
Write Community Specify the write community used by the agent (defaults to private community).
System Contact Specify the system contact.
System Name Update the system name, as necessary. The default system name is “”.
System Description Update the system description, as necessary. The default system information
includes the manufacturer name, model name, version and the serial number of the
device.
System Location Specify a system location for the SNMP setting.
Lantronix MIB File Click the Lantronix MIB file name to save and load it into the MIB browser and trap
receiver. This is the base MIB file for Lantronix products. Load or compile this file
first.
MIB File Click the MIB file name to save and load it into the MIB browser and trap receiver.
This is the product specific MIB file. Load or compile this after the Lantronix MIB
File.
RSS Settings Description
To Next Page
Loading...
Need help?
General
