4: Device Discovery and Quick Setup
PremierWave® XC HSPA+ Intelligent Gateway User Guide 30
Accessing the PremierWave XC HSPA+ Device Using DeviceInstaller
This section covers the steps for locating a PremierWave XC HSPA+ unit and viewing its
properties and device details. The DeviceInstaller application is a free utility program provided by
Lantronix that discovers, configures, upgrades and manages Lantronix device servers.
Notes:
For instructions on using the DeviceInstaller utility to configure the IP address and
related settings or for more advanced features, see the DeviceInstaller Online Help.
Auto IP generates a random IP address in the range of 169.254.0.1 to
169.254.255.254, with a netmask of 255.255.0.0, if no BOOTP or DHCP server is
found. These addresses are not routable.
You may also use UPnP to discover PremierWave XC HSPA+ units. See Accessing
the PremierWave XC HSPA+ Device Using UPnP on page 29.
Make note of the MAC address. It may be needed to perform various functions in
DeviceInstaller.
To use the DeviceInstaller utility, first install the latest version from the downloads page on the
Lantronix web site www.lantronix.com/downloads
.
1. Run the executable to start the installation process and respond to the installation wizard
prompts. (If prompted to select an installation type, select Typical.)
2. Click Start -> All Programs -> Lantronix -> DeviceInstaller 4.4 -> DeviceInstaller.
3. When DeviceInstaller starts, it will perform a network device search. To perform another
search, click Search.
4. Expand the PremierWave folder by clicking the + symbol next to the folder icon. The list of
available Lantronix PremierWave devices appears.
5. Select the PremierWave unit by expanding its entry and clicking on its IP address to view its
configuration.
6. On the right page, click the Device Details tab. The current PremierWave device
configuration appears. his is only a subset of the full configuration; the full configuration may
be accessed via Web Manager, CLI or XML.
Device Detail Summary
Note: The settings are display only in this table unless otherwise noted.
Current Settings Description
Name Shows the PremierWave XC HSPA+ device name.
DHCP Device Name
Displays one of the names the PremierWave XC HSPA+ unit will send to
the DHCP server if it is configured to obtain an address in this manner.
Group Configurable field. Enter a group to categorize the PremierWave unit.
Double-click the field, type in the value, and press Enter to complete. This
group name is local to this PC and is not visible on other PCs or laptops
using DeviceInstaller.
To Next Page
Loading...
Need help?
General
