Lantronix PREMIERWAVE XC HSPA+ User Manual

PremierWave® XC HSPA+ Intelligent Gateway User Guide 85
12: Network Services
DNS Settings
This section describes the active run-time settings for the domain name system (DNS) protocol.
The primary and secondary DNS addresses come from the active interface. The static addresses
from the Network Interface configuration settings may be overridden by DHCP.
Note: The blue text in the XML command strings of this chapter are to be replaced with
a user-specified name.
Table 12-1 DNS Settings
To View or Configure DNS Settings:
Using Web Manager
 To view DNS current status, click DNS in the menu.
 To lookup DNS name or IP address, click DNS in the menu to access the Lookup field.
Note: To configure DNS for cases where it is not supplied by a protocol, click Network
in the menu and select Interface -> Configuration.
Using the CLI
 To enter the DNS command level: enable -> dns
Using XML
 Include in your file: <configgroup name=”interface” instance=”eth0”>
Setting / Field Description
Lookup
Perform one of the following:
 Enter an IP address, and perform a reverse Lookup to locate the hostname for
that IP address
 Enter a hostname, and perform a forward Lookup to locate the corresponding IP
address

Lantronix PREMIERWAVE XC HSPA+ Specifications

General

Brand	Lantronix
Model	PREMIERWAVE XC HSPA+
Category	Gateway
Language	English