Lantronix PREMIERWAVE XC HSPA+ User Manual

Appendix A: Technical Specifications
PremierWave® XC HSPA+ Intelligent Gateway User Guide 129
USB Connector
 1 x USB Type A Host Connector (USB 2.0)
I/O Interface
Input
 Connection: Sensors/Events
 Voltage acceptance: 0 to 30 VDC
 Digital input event: User configurable
 Optical: 1.5 KV
Output
 Software: Turn Relay Output ON and OFF
 Automatic Event Trigger: ON or OFF (possible events includeloss of cellular link, loss of
Ethernet link, digital input event)
 Relay Output Response: User configurable
 Support 1A @24V
I/O Connectors
 2 x Digital Input, 1 x Relay Output (Terminal Block)
LED Indicators
 Cellular Mode, Signal Strength, Serial RX/TX, USB Connection, System Status, Power,
Ethernet Speed, Ethernet Activity
Routing/Gateway
 NAT, Port Forwarding, SPI Firewall
 WAN Failover/Failback
 Multiple Ethernet LAN Hosts
 Multihoming

Lantronix PREMIERWAVE XC HSPA+ Specifications

General

Brand	Lantronix
Model	PREMIERWAVE XC HSPA+
Category	Gateway
Language	English