6: Network Settings
PremierWave® Intelligent Gateway User Guide 45
To Configure Network 2 Interface Settings
Using Web Manager
To modify network 2 wwan0 interface information, click Network on the menu and select
Network 2 > Interface > Configuration.
Using the CLI
To enter the cellular command level: enable -> config -> if 2
Using XML
Include in your file:
configgroup name = "cellular interface” instance =
“wwan0”>
Network 2 (Cellular “wwan0”) Link Settings
This page shows configuration of an wwan0 link on the device.
Table 6-7 Network 2 (wlan0) Link Settings
To Configure Network 2 Link Settings
Using Web Manager
To modify network 2 wwan0 interface information, click Network on the menu and select
Network 2 > Link > Configuration.
Using the CLI
To enter the link command level: enable -> if 2 -> link
Using XML
Include in your file:
<configgro
up name = "wwan0 link
" instance = "wlan0">
Network 2 Link
Settings
Description
APN Enter the configurable network identifier used by a mobile device when
connecting to a GSM carrier.
Username Enter the Username for dial up to cellular carrier, if required.
Password Enter the Password for dial up to cellular carrier, if required.
Dialup String Enter the modem string used for making connection to carrier.
Roaming Enable or disable the network roaming.
To Next Page
Loading...
Need help?
General
