Lantronix PREMIERWAVE XC HSPA+ - Page 31

4: Device Discovery and Quick Setup
PremierWave® XC HSPA+ Intelligent Gateway User Guide 31
Comments Configurable field. Enter comments for the PremierWave unit. Double-click
the field, type in the value, and press Enter to complete. This description or
comment is local to this PC and is not visible on other PCs or laptops using
DeviceInstaller.
Device Family Shows the device family type as “PremierWave”.
Short Name Shows ”premierwave_xc_hspa” by default.
Long Name Shows “Lantronix PremierWave XC HSPA+” by default.
Type Shows the device type as “PremierWave XC HSPA+”.
ID Shows the PremierWave ID embedded within the unit.
Hardware Address Shows the PremierWave hardware (MAC) address.
Firmware Version Shows the firmware currently installed on the PremierWave unit.
Extended Firmware Version Provides additional information on the firmware version.
Online Status Shows the PremierWave unit status as Online, Offline, Unreachable (the
PremierWave is on a different subnet), or Busy (the PremierWave is
currently performing a task).
IP Address Shows the PremierWave current IP address. To change the IP address,
click the Assign IP button on the DeviceInstaller menu bar.
IPV6 Link Local Address Shows the current PremierWave IPv6 link local address.
IPV6 Global Address Shows the current PremierWave IPv6 global address.
IP Address was Obtained Appears “Dynamically” if the PremierWave device automatically received an
IP address (e.g., from DHCP). Appears “Statically” if the IP address was
configured manually.
If the IP address was assigned dynamically, the following fields appear:
 Obtain via DHCP with values of True or False.
 Obtain via BOOTP with values of True or False.
Subnet Mask Shows the subnet mask specifying the network segment on which the
PremierWave unit resides.
Gateway Shows the IP address of the router of this network.
There is no default.
Interfaces Shows information about the Ethernet (eth0) and wireless (wlan0)
interfaces for your PremierWave unit. Click the + sign beside eth0 or wlan0,
and then the Status and Configuration subcategories to view status and
configuration information on these interfaces.
Number of Serial Ports Shows the number of serial ports on unit.
Number of Relay Outputs Shows the number of relay outputs on the intelligent gateway.
Supports Configurable Pins Shows False, indicating configurable pins are not available on the
PremierWave unit.
Supports Email Triggers Shows True, indicating email triggers are available on the unit.
Telnet Supported Indicates whether Telnet is enabled on this PremierWave unit.
Telnet Port Shows the PremierWave port for Telnet sessions.
Web Port Shows the PremierWave port for Web Manager configuration (if Web
Enabled field is True).
Firmware Upgradeable Shows True, indicating the PremierWave firmware is upgradeable as newer
versions become available.
Current Settings Description