Lantronix PREMIERWAVE XC HSPA+ User Manual

5: Configuration Using Web Manager
PremierWave® XC HSPA+ Intelligent Gateway User Guide 36
Discovery Allows you to view and modify the configuration and statistics for device
discovery.
91
DDNS Alllows you to view and configure DDNS settings. 53
DNS Shows the current configuration of the DNS subsystem and the DNS
cache.
85
Email Shows email statistics and lets you clear the email log, configure email
settings, and send an email.
92
Filesystem Shows file system statistics and lets you browse the file system to view a
file, create a file or directory, upload files using HTTP, copy a file, move a
file, or perform TFTP actions.
109
FTP Shows statistics and lets you change the current configuration for the File
Transfer Protocol (FTP) server.
86
Gateway Shows statistics and lets you change the current configuration for the
gateway.
47
GRE Alllows you to view and configure GRE settings. 56
Host Lets you view and change settings for a host on the network. 83
HTTP Shows HyperText Transfer Protocol (HTTP) statistics and lets you change
the current configuration and authentication settings.
87
Line Shows statistics and lets you change the current configuration and
Command mode settings of a serial line.
67
Network Shows status and lets you configure the network interface. 38
Protocol Stack Lets you perform lower level network stack-specific activities. 111
Query Port Lets you change configuration settings for the query port. 114
Relay Allows you to view and configure relay output, shows current relay output
statuses and allows you to modify display of both relays.
80
RSS Lets you change current Really Simple Syndication (RSS) settings. 89
SMS Shows and allows modification to the current configuration of SMS. 94
SMTP Shows and allows modification of the current configuration of SMTP. 92
SNMP Shows and allows modification of the current configuration of SNMP. 92
SSH Lets you change the configuration settings for SSH server host keys, SSH
server authorized users, SSH client known hosts, and SSH client users.
101
SSL Lets you upload an existing certificate or create a new self-signed
certificate.
105
Syslog Lets you specify the severity of events to log and the server and ports to
which the syslog should be sent.
86
System Lets you reboot device, restore factory defaults, upload new firmware, and
change the device long and short names.
119
Terminal Lets you change current settings for a terminal. 82
Tunnel Lets you change the current configuration settings for an incoming tunnel
connection.
70
Virtual IP Alllows you to view and configure Virtual IP settings. 52
VPN Lets you view and configure VPN settings. 54
Web Manager Page
(continued)
Description See
Page

Lantronix PREMIERWAVE XC HSPA+ Specifications

General

Brand	Lantronix
Model	PREMIERWAVE XC HSPA+
Category	Gateway
Language	English