PLMNL0243 REV. A, Effective Date: 03/24/16 4 FiberMINI ™ 2.0 Operation Manual
The head arrives with the adapter for
the requested fiber end style.
See Appendix F – Fiber End Styles for
samples of each.
The fiber can be supplied with a
collimator, but can also accommodate
a third party collimator.
o If Laser Mechanisms supplies a
collimator, the interface may or
may not include a simple clamp.
See Figure 6.
o If a third party collimator is used,
clamping assemblies ranging from
10 – 44 mm are available.
See Figure 7.
Note that the clear aperture of
the head is 25 mm.
Figure 6
To Next Page
Loading...