T
IME
O
VER
D
ISTANCE
M
EASUREMENT
Electronic Copy of LTI’s UltraLyte User’s Manual – 7
th
Edition June 1998
26
Entering the Distance Manually
If you already know the distance between the two
reference points, you may enter it directly into the
instrument. Use this procedure:
Action Result
1. Power on by pressing
the trigger.
F
MPH
SPEED
2. Press the
Speed/Options button
(right button panel) to
invoke TOD mode.
SPEED
TOD
F
3. Press and hold the
Select/Edit button to
invoke edit mode.
SPEED
TOD
F
Action Result
4. Edit in the distance.
(For this example, we
use 300 feet.)
Select/Edit selects
digits. Test/Edit Up
increments a digit,
Backlight/Edit Dn
decrements it.
SPEED
TOD
F
5. When you have set the
right-most digit, press
Select/Edit once more
to exit edit mode and
return to the TOD
screen. The distance
you entered displays in
the bottom display
area.
SPEED
TOD
F
For Internal Use Only. Not for Distribution.
To Next Page
Loading...
