Laser Technology UltraLyte - 20-20 Download Format; Version ID Requests

A
PPENDIX
A: S
ERIAL
I
NTERFACE
S
PECIFICATIONS
Electronic Copy of LTI’s UltraLyte User’s Manual – 7
th
Edition June 1998
68
<CR><LF>
is a carriage return/line feed
combination, which terminates each
Criterion-format message.
If a measurement error occurs, the message
downloads null values for the measurements
that failed.
Example Survey Messages
The sample messages in this subsection use
these example values:
Slope distance: 27.5 feet
Horizontal distance: 22.6 feet
Vertical distance: 15.7 feet
Inclination: 34.8 degrees
UL100 (English units):
$PLTIT,HV,27.5,F, , ,0.00,D,27.5,F*3D
UL100 (Metric units):
$PLTIT,HV,8.38,M, , ,0.00,G,8.38,M*3E
UL200 (English units):
$PLTIT,HV,22.6,F, , ,34.8,D,27.5,F*34
UL200 (English units)
$PLTIT,HV,6.89,M, , ,38.7,G,8.38,M*36
20-20 Download Format
Version ID Requests
When the serial format is set to
20.20.Cr,
the
instrument accepts 20/20- and Marksman-format
requests for the firmware version ID. The format
is as follows:
ID<CR>
[
<LF>
]
For Internal Use Only. Not for Distribution.