6.7 Specifying the set point
Personnel:
n
Operating personnel
1. Switch to the main menu.
2. Select the menu item Set temperature in the main menu.
An entry window appears. The cursor blinks under the value. The
set temperature can be set to a value within the limits displayed.
3. Customize the set temperature accordingly.
4. Press the input button to confirm.
6.8 Activating and deactivating standby
In standby mode, device components such as the pump are switched o. The
display remains active.
Personnel:
n
Operating personnel
1. Press the [STOP] soft key.
The device is now in Standby mode.
2. Press the [START] soft key to activate the Operation mode.
6.9 SmartCool (cooling)
The cooling unit of the constant temperature equipment is operated in
the default [autom.] setting. Depending on the temperature and operating
status, the cooling unit is automatically switched on or o. You can also
manually switch the cooling unit on or o via the menu.
Fig. 25: Specifying the set temperature
Fig. 26: Device in operation
V08Variocool44 / 97
To Next Page
Loading...
Need help?
General
