3. Press the Delete soft key.
The segment is deleted.
Please note the following:
n No segments can be added or deleted in a currently running program.
n In the running program, changes of the existing temperature values
and segment durations are possible. The segment is continued as if the
change had been eective since the beginning of the segment.
n If the new segment time is shorter than the elapsed segment time, the
program jumps to the next segment.
Personnel:
n
Operating personnel
1. Press the Prog.x/y soft key in the soft key bar in the Home window.
x represents the currently running program; y represents the
current program loop.
2. The currently running program opens.
3. You can now edit the segments of the currently running program.
Personnel:
n
Operating personnel
1. When you have completed the program, you can return to the pro-
gram overview with the left arrow button.
6.17.4 Defining program loops
Personnel:
n
Operating personnel
1. Select the Loops menu item for the selected program.
An entry window appears. The loops can be defined within the
displayed limits.
Editing a program currently running
Fig. 61: The currently running program
Completing editing
Fig. 62: Setting program loops
V08Variocool66 / 97
To Next Page
Loading...
Need help?
General
