11
2.1.4 Powering the control box
The LEADER Scan control box is delivered with a polymer lithium battery pack with a 5 hour battery
life which is inserted into the back of the control box.
The battery can be charged whilst in the box, but the box cannot be used
Charging can take place between 0°C min and 45°C max using the supplied charger.
During recharging, an LED located on the charger gives the following indications:
• Green: battery charged or battery not connected to the charger.
• Red: battery charging.
During operation, if the battery pack is flat, the user can either use another battery
pack (provided as an option) or the emergency battery pack in place of the battery
pack. The emergency battery pack requires 10 x AAA lithium batteries
(batteries not provided).
The battery pack can ONLY be recharged with the supplied charger unit. It can be used
with 100/240v AC - 50/60Hz.
International adaptors allow the battery pack to be recharged using all standard US, Australian,
European and UK sockets.
Once the device is switched on and application started, an icon representing the battery pack’s
charge level is displayed on the top left of the screen.
To Next Page
Loading...