32
It is possible to move the pointer in order to view the desired depth signal on the oscillogram.
For a 0-30m search, LEADER Scan can detect up to 10 people:
1 per section (0-4, 4-8, 8-12, 9-12, 12-16, 16-20, 20-24 and 24-26m). The scan can last up to
10 minutes in this case (less if the victims are detected before 1 minute in some sections)
For a 0-10m search, the device will divide the cone into 0-4, 4-8 and 8-10m.
For a 0-6m search, the device will divide the cone into 0-4 and 4-6m.
When “Automatic” mode is launched, it is possible to browse through the menu.
Only some functions can be accessed and/or adjusted:
“Sensitivity, Record, Brightness, Right/Left hand, Source”
The other functions cannot be adjusted.
They must be adjusted before launching “Automatic” mode.
If not, stop the search in progress to adjust them.
4.10 Source function
- Allows switching between Auto mode to SD card read mode.
Go to the menu and select.
Move from “Auto to “File” mode using the or buttons.
To Next Page
Loading...