Leetro MPC6575 User Manual

PAD03 Operation
11
5.6 Processing Interface
Press Start to enter the processing interface shown as follows..
File: Name of the file which is to be processed.
Speed: Percentage of the processing speed.
Power: Percentage of the processing power.
Time: Time for processing this file.
When processing,
Press and to adjust the percentage of the processing power (only for Power, not for
Corner -Power). Value should be from 0-100.
Press and to adjust the percentage of the processing speed. Value should be from
0-100.
Press Start/Pause to start or pause the processing.
Press Stop to cancel the processing. The user interface shows Stopped. Press Esc to back to
the main user interface.
Press the button Start/Pause during the processing to shift between commands such as start
and pause.
The pause interface is as follows:
Once the pause interface as the above is entered, only Start/Pause and Stop buttons can be
effective.
To back to the processing interface, press the button Start/Pause twice.
To cancel the processing, press Stop and following text displays.
Once the stop interface as the above is entered, only Start/Pause, Esc, and
buttons can be effective.
To enter the processing interface, press the button Start/Pause.
To return to the main interface to set parameters, press Esc.
Press to generate jogging motion according to the set parameters.
FILE AAA
SPEED
100％
POWER 100 / 100％
TIME 0 ：0 ：15
PAUSED
PRESS START/PAUSE TO
CONTINUE
STOPPED

Leetro MPC6575 Specifications

General

Brand	Leetro
Model	MPC6575
Category	Controller
Language	English