☞
While other SD cards can be used, Leica Geosystems recommends to
onl
y use Leica SD cards and is not responsible for data loss or any
other error that can occur while using a non-Leica card.
Removing the SD card or USB stick while the field controller is turned on can
cause loss o
f data. Only remove the SD card or USB stick or unplug connecting
cables when the field controller is switched off.
Data can be transferred in various ways. Refer to "4.1.8 Connecting to a Per-
so
nal Computer".
SD cards can directly be used in an OMNI drive as supplied by Leica Geosys-
tems. Other PC car
d drives can require an adaptor.
2.4 Container Contents