Leica Geosystems CTR20 - Power, Battery, and WLAN Management

7. The InstallShield Wizard Completed window appears.
8.
Click Finish to exit the wizard.
1. Start the PC.
2. Plug the cable into the instrument.
3. Turn on the instrument.
4. Plug the cable into the USB port of the PC.
5. Press the Windows Start button at the bottom left corner of the
scr
een.
6. Type the IP address of the device into the search field.
•
\\192.168.254.1\ f
or field controller
•
\\192.168.254.3\ for other instruments
7. Press Enter.
A file browser opens. You can now browse within the folders on the
instrument.
4.1.9 Enabling WLAN in Windows EC7
☞
By default, the WLAN module is disabled to save battery power.
1. In order to minimise Leica Cap
tivate, press Fn and Home.
2. Select Start\Settings\Network and Dial-Up Connections.
3. In the Network Connections window:
Tap the TIWLNAPI1 icon and select File\Enable.
OR
Hold the stylus on the TIWLNAPI1 icon. Select Enable from the
context menu.
4.2 Batteries
4.2.1 Operating Principles
•
T
he ba
ttery must be charged before using it for the first time because it is
delivered with an energy content as low as possible.
•
The permissible temperature range for charging is from 0 °C to +40 °C/
+32 °F to +104 °F. For optimal charging, we recommend charging the bat-
teries at a low ambient temperature of +10 °C to +20 °C/+50 °F to +68 °F
if possible.
•
It is normal for the battery to become warm during charging. Using the
chargers recommended by Leica Geosystems, it is not possible to charge
the battery once the temperature is too high.
•
For new batteries or batteries that have been stored for a long time
(> three months), it is effectual to make only one charge/discharge cycle.
•
For Li-Ion batteries, a single discharging and charging cycle is sufficient. We
recommend carrying out the process when the battery capacity indicated
on the charger or on a Leica Geosystems product deviates significantly
from the actual battery capacity available.
Connect to PC via USB
cable s
tep-by-step
Enabling WLAN step-
by-step
Firs
t-time use/
charging batteries
40 Operation