EasyManua.ls Logo

Leica Geosystems CTR20 - Care and Transport; Product Transport and Storage; Cleaning and Drying Procedures

Leica Geosystems CTR20
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Care and Transport
5.1 Transport
Never carry the product loose in a road vehicle, as it can be affected by shock
and vibr
ation. Always carry the product in its container and secure it.
For products for which no container is available use the original packaging or
its equivalent.
When transporting the product by rail, air or sea, always use the complete orig-
inal Leica Geosys
tems packaging, container and cardboard box, or its equiva-
lent, to protect against shock and vibration.
When transporting or shipping batteries, the person responsible for the prod-
uct mus
t ensure that the applicable national and international rules and regula-
tions are observed. Before transportation or shipping, contact your local pas-
senger or freight transport company.
5.2 Storage
Respect the temperature limits when storing the equipment, particularly in
summer if the equipmen
t is inside a vehicle. Refer to "6 Technical Data" for
information about temperature limits.
R
e
fer to "6 Technical Data" for information about storage temperature
range.
Remove batteries from the product and the charger before storing.
After storage recharge batteries before using.
Protect batteries from damp and wetness. Wet or damp batteries must be
dried before storing or use.
A storage temperature range of 0 °C to +30 °C / +32 °F to +86 °F in a dry
environment is recommended to minimize self-discharging of the battery.
At the recommended storage temperature range, batteries containing a
40% to 50% charge can be stored for up to one year. After this storage
period the batteries must be recharged.
5.3 Cleaning and Drying
Use o
nly a clean, soft, lint-free cloth for cleaning. If necessary, moisten the
cloth with water or pure alcohol. Do not use other liquids; these may
attack the polymer components.
Dry the product, the transport container, the foam inserts and the accessories
at a t
emperature not greater than 40 °C/104 °F and clean them. Remove the
battery cover and dry the battery compartment. Do not repack until everything
is dry. Always close the transport container when using in the field.
Transport in a road
vehicle
Shipping
Shipping, transp
ort of
batteries
Product
Li-Ion batteries
Product and
accesso
ries
Damp products
Care and Transport 47

Related product manuals