4.4 Working with the Memory Device
4.4.1 Working with the SD Card
•
Keep the car
d dry.
•
Use it only within the specified temperature range.
•
Do not bend the card.
•
Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent
damage to the car
d.
☞
The SD card can be inserted into a slot behind the connector cover.
1. Push the slide fastener of the connector cover in the direction of the
arr
ow with the open-lock symbol. Open the connector cover.
2. Hold the card with the contacts facing the slot. Slide the card firmly
into the slot until it clicks into position.
☞
Do not force the card into the slot.
3. To release the card from the slot, gently press the top of the card.
The card pops out and you can remove it from the slot.
4. Close the connector cover. Push the slide fastener of the battery
compartment in the direction of the arrow with the closed-lock sym-
bol.
☞
☞
Insert and remove the
SD car
d step-by-step
44 Operation
To Next Page
Loading...
