Leica Geosystems CTR20 - Definition of Use; Limits of Use

1.2 Definition of Use
•
R
emo
te control of product.
•
Data communication with external appliances.
•
Recording measurements.
•
Computing with software.
•
Carrying out measurement tasks using various GNSS measuring techni-
ques.
•
Recording GNSS and point related data.
•
Measuring raw data and computing coordinates using carrier phase and
code signal from GNSS satellites.
•
Us
e o
f the product without instruction.
•
Use outside of the intended use and limits.
•
Disabling safety systems.
•
Removal of hazard notices.
•
Opening the product using tools, for example screwdriver, unless this is
permitted for certain functions.
•
Modification or conversion of the product.
•
Use after misappropriation.
•
Use of products with recognizable damages or defects.
•
Use with accessories from other manufacturers without the prior explicit
approval of Leica Geosystems.
•
Inadequate safeguards at the working site.
•
Controlling of machines, moving objects or similar monitoring application
without additional control and safety installations.
1.3 Limits of Use
Suitable for use in an atmosphere appropriate for permanent human habita-
tion: no
t suitable for use in aggressive or explosive environments.
WARNING
Working in hazardous areas, or close to electrical installations or simi-
lar situa
tions.
Life Risk.
Precautions:
▶
Local safety authorities and safety experts must be contacted by the per-
son responsible for the product before working in such conditions.
The following advice is only valid for battery charger, power adapter and car
adap
t
er.
Suitable for use in dry environments only and not under adverse conditions.
Intended use
Reasonably
fo
reseeable misuse
Environment
☞
Environment
Safety Directions 7