5.4006.8501.0 B
Maintenance 6-9
Clean
Figure 45. Clean the nozzle
KEY: 1. Nozzle - 2. Coupling nut
1. Remove all manure from the sensing wheel and the manure scraper.
2. Remove the nozzle (1) from its base with a spanner.
3. Clean the nozzle.
4. Install the nozzle on its base.
1. Make sure to position the line in the nozzle horizontally (1) (see figure 46 on page 6-10).
2. Make sure the nozzle sprays in the direction of the floor.
in n o vato rs in ag ricu ltu r e
To Next Page
Loading...